8 Tips To Up Your Window Repairs Game

UPVC Window Repairs

Upvc windows are energy efficient and help to reduce heating bills. However, as they age, issues can develop that require repair. This could be due to damaged hinges, handles, or locks.

DIY enthusiasts can repair wooden windows relatively easily. It can also be cheaper than buying a new window.


Cracks and tears in windows made of uPVC can be a major issue. If they are not fixed, they could lead to water ingress and less effective barriers against cold weather and even the potential for structural damage. It is crucial to find a local repair or builder who specializes in the repair of upvc window repairs frames and has the expertise, experience, and tools needed to produce the best results. This will ensure that the crack is fixed before it gets worse and you don’t need to replace the window glass or window unit.

There are a variety of home solutions that can be utilized to repair small cracks in the glass. Superglue and masking tape are two of the most commonly used products used to keep glass that has cracked in position for a short period of time. For cracks that are more extensive, tape may need be extended on both sides.

Alternatively, two-part epoxy can be used to repair broken or cracked glass. Hardware stores typically sell this product for around $10. Make sure your workspace is prepared before mixing the epoxy. Also, make sure you have all the tools necessary for the job.

If you notice that your lower or upper sash isn’t lifting, it is likely because the cords that connect to the sashweights are damaged. This is an easy fix that is done using a ladder and a flathead screwdriver. A damaged dripcap can be replaced at home. Most home centers carry drip caps that are rot-free and can be easily nailed or caulked to be fixed. Lastly, if you have a double or triple-pane window, be certain to ensure that one of the panes isn’t broken. The reason is that the gases that are trapped between the windows are responsible for increasing the efficiency of the window. This should not be allowed to escape.

Water Leaks

If your uPVC windows are leaking, it could ruin the interior of your home and lead to expensive repairs. Water leaks may also cause structural damage to your home, as well as the growth of mold. It is crucial to address any problems caused by leaking windows as soon as possible to limit the damage.

A damaged sealant around window frames is a typical cause of leaks. Silicone caulking will restore the seal to its original state and stop leakage. Check for cracks and gaps around the window frame, as well as the brick or stone wall surrounding your windows.

Another reason for leaky windows is blocked drainage holes or a defective flashing. Make sure that the drainage holes haven’t been clogged or blocked, especially after a heavy downpour. It’s also an excellent idea to check the flashing on the top of your window and ensure it’s sealed correctly.

Finally, it’s essential to check that your drip cap isn’t missing or decaying. A rotted drip cap or one that’s missing can allow water from above to enter your window and cause structural damage. Replacing a leaky drip cap is not a difficult task. It’s as easy as buying a new one, and nailing it in place.

It’s also a good idea to have your windows tested for water-tightness by a professional. They can make use of a device to test the water-tightness of your windows and ensure that they comply with the standards of the industry. If your windows fail the test, they will need to be replaced. This is a costly fix, but it’s worth it for the comfort and security of your family.


If your windows aren’t closing properly it can cause many issues, such as drafts condensation, and an increase in energy bills. It could also be an indication that the windows weren’t installed correctly or that the sealant is worn out. There are fortunately, a few options to correct the issue.

To fix your window properly it is essential to create a space with plenty of natural light. Start by laying newspaper or an old blanket on the floor to protect it from drips or splinters that may come from the window as you work.

It is also recommended to use a white cloth which has been immersed in a solution of detergent and water. This will ensure you don’t leave any stains of color on your windows. When you’re ready to work on your uPVC windows, begin by making a note of where the hinge channel must be situated. Then unscrew the channel from the frame and fill in the screw holes with epoxy (for upvc window repairs windows) or wood filler (if the frames are made of wood). Make sure to smooth out the filled hole before it sets.

Reinstall the hinge channel after the holes have been filled. Make sure that it is aligned with the window jamb. Also, make sure make sure you drill the holes for the new screws about quarter inch away from the original locations.

Next, measure the length of the spindle protruding from the underside of the handle and then order a replacement online or bring the old one in to a hardware store for matching. Finally, back out the setscrew on the shaft of the operator and file it flat so the set screw will lock onto the shaft (photo). Now, your uPVC window should shut without difficulty.

Broken Hinges

You will have difficulty opening or closing your uPVC windows in the event that the hinges are damaged or not working correctly. This could create problems with security and prevent your home from being cool or warm. It’s easy to get an entirely new hinge for your uPVC windows. It’s essential to make sure you have the right hinge for your windows.

The hinges must be the same size to fit into the window frame. The most common type of hinge used in uPVC windows is a standard 18mm or 15mm UPVC window hinge. There are also special hinges for wooden frames. The right type of hinge will allow you to avoid common problems with your windows.

Your window hinges may be loose or stiff for several reasons. The most common reason is that the hinges are not tightened enough. You can check this with a screwdriver. locate the friction screw that is at the end of the hinge, and then loosen it. After that, you can adjust it by twisting it in any direction until you get the desired result.

Call Preston Glass Fix if your UPVC window’s hinges aren’t functioning properly. We can offer a quick fix. Our experts will assess the condition of your hinges and offer you advice on the best solution. We can replace hinges on windows, retension them or install new locking mechanisms to ensure that your UPVC Windows are secure and safe.

Faulty locks

UPVC window mechanisms and locks are an essential component of security for your home. They make it very difficult to open windows without breaking into the home. It can be a frustrating experience when a lock fails, but you don’t have to replace the entire window.

It’s often a minor issue that could have been easily avoided by regular maintenance. We recommend that you have your uPVC window cleaned regularly as part of our annual maintenance program to minimize the chance of any problems.

The majority of modern uPVC windows come with locks that operate by pushing the nose of the handle across a wedge block then turning the handle to close the lock. They are very efficient in keeping the window secure, but over time they can start to fail if they’re not properly maintained. We suggest using WD-40 for lubrication a couple of times per year.

If you notice that your uPVC windows aren’t opening and shut as quickly as they used to, or If the lock isn’t functioning properly, it is likely that there is a problem with the gearbox that locks the window frame. Accessing this can be tricky as it requires the removing of seals around the frame and removing the handle (be careful not to damage these).

A locksmith who is skilled in UPVC repair will be able detect the issue quickly, and then replace the failed locking mechanism using a precise replacement. This simple and quick fix could save you hundreds of dollars by not having to purchase new windows.

Leave a Reply